TeSys

TeSys T

LTMR

Motor controller

Equipment monitoring and control

5…100 A

24 V DC

56...127 mA

20.4…26.24 V DC

Modbus

Modbus 2-wire RS 485 interface, addressing 1...247, transmission rate 1.2...19.2 kbit/s, RJ45 with 2 shielded twisted pairs
Modbus 2-wire RS 485 interface, addressing 1...247, transmission rate 1.2...19.2 kbit/s, terminal block with 2 shielded twisted pairs

690 V conforming to EN/IEC 60947-1
690 V conforming to CSA C22.2 No 14
690 V conforming to UL 508

6 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-1
0.8 kV communication circuit conforming to EN/IEC 60947-4-1
0.8 kV supply, inputs and outputs conforming to EN/IEC 60947-4-1

100 kA conforming to EN/IEC 60947-4-1

4 A gG for output
0.5 A gG for control circuit

Thermal overload protection
Phase unbalance
Overload (long time)
Phase failure
Thermal protection
Power factor variation
Reverse polarity protection
Overload
Locked rotor
Load fluctuation
Earth-leakage protection

Remaining operating time before overload tripping
Phase fault and earth fault trip counters
Fault recording
Waiting time after overload tripping
Motor control command recording
Event recording
Starting current and time
Trip history information
Running hours counter/operating time
Trip context information

6

7 mA

Logic input: < 5 V and <= 15 mA for 5 ms

Logic input: < 15 V and 2...15 mA for 15 ms

2 Hz

5 A at 250 V AC for logic output
5 A at 30 V DC for logic output

480 VA (AC-15), Ie = 2 A, 500000 cycles (output)
30 W (DC-13), Ie = 1.25 A, 500000 cycles (output)

1800 cyc/h

1 NO + 1 NC fault signal
3 NO

Phase current I1, I2, I3 RMS
Temperature
Average current Iavg
Earth-fault current
Imbalance current

5...15 % earth fault current internal measurement (for current > 0.3 A)
1 % voltage (100...830 V)
3 % power factor (cos φ > 0.6)
5 % earth fault current external measurement (< 5 % or 0.01 A)
+/- 30 min/year internal clock
0,02 temperature
5 % active and reactive power
0,02 current

III

5.08 mm

Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible with cable end
Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) flexible without cable end
Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible without cable end
Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) solid without cable end
Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) flexible with cable end
Control circuit: connector 2 cable(s) 0.2…1.5 mm² (AWG 24...AWG 14) flexible without cable end
Control circuit: connector 2 cable(s) 0.5…1.5 mm² (AWG 24...AWG 14) flexible without cable end
Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) solid without cable end

Control circuit: 0.5…0.6 N.m flat screwdriver 3 mm

3

Electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2
Radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3
Fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4
Fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4
Voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11
Conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6
Temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5
Temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5
Control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5
Control circuit: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5
Communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5
Relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5
Relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5

91 mm

61 mm

122.5 mm

0.53 kg

Web server

LTMR

IACS E10
CSA C22.2 No 14
EN 60947-4-1
UL 508
IEC 60947-4-1

NOM
RMRoS
DNV
C-Tick
RINA
CSA
BV
GL
KERI
EAC
LROS (Lloyds register of shipping)
ABS
UL
CCC
ATEX

12 x 24 hour cycles conforming to EN/IEC 60068-2-30
48 h conforming to EN/IEC 60070-2-11
TH conforming to EN/IEC 60068

650 °C conforming to EN/IEC 60695-2-12
960 °C conforming to UL 94

-20…60 °C

-40…80 °C

<= 2000 m without derating

Vibrations mounted on symmetrical rail: 1 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6
Vibrations plate mounted: 4 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6
Shocks half sine wave acceleration: 15 Gn for 11 ms conforming to EN/IEC 60068-2-27

IP20

Green Premium product

REACh Declaration

Compliant
EU RoHS Declaration

Yes

Yes

China RoHS declaration
Product out of China RoHS scope. Substance declaration for your information

Product Environmental Profile

End of Life Information

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

18 months