Max Measurement Range
>1 m - <=20 m
Sensing Mode (General)
Proximity
Sensing Mode (Detailed)
Time of Flight
Primary Housing Material
PBT
Analog Output Configuration
4-20 mA
Quick Disconnect Type
No QD
Analog Resolution/Discrete Repeatability
0.1% of distance (1.5 min)
Max Sensing Distance (mm)
3000
Minimum Sensing Distance (mm)
300
Delay at Power-up (ms)
500
Temperature Effect (mm/°C)
0.02% of sensing distance/°C
Vibration
MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Output Saturation Voltage NPN Outputs
< 1.6 V at 100 mA
Output Saturation Voltage PNP Outputs
< 3 V at 100 mA
Analog Current Output Rating
1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
Max Discrete (Switched) Output (mA)
100
Output Protection
Protected against short circuit conditions
Max Operating Temperature (°C)
70
Min Operating Temperature (°C)
-40
Max Op. Relative Humidity Non-Condensing (%)
95 at 50°C
Minimum Response Time (ms)
135
Analog Linearity (mm)
0.25% of distance
Minimum Window Size (mm)
10
Remote Teach and Laser Control Input Impedence
55 kΩ
Ultrasonic Frequency (kHz)
114
Max Off-state Leakage Current (µA)
NPN: < 200 at 30 V dc; PNP: < 10 at 30 V dc
Power/Current Consumption (exclusive of load)
40 mA
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Feature: Remote Teach
Yes
Feature: Clear Object Detection
Yes
Feature: Timing (Hold/Delay)
No
Feature: Chemical Resistant
No
Feature: Quick Disconnect
No
Application: Ultrasonic
Yes
Common Ethernet Protocol
No
1-wire Serial Interface
No