Sensing Beam
Visible Red Laser
Max Measurement Range
>100 mm - <=500 mm
Sensing Mode (General)
Proximity
Sensing Mode (Detailed)
Triangulation
Housing Style
Rectangular
Primary Housing Material
Zinc Alloy Die-Cast
Laser Classification
Class 2
Quick Disconnect Type
M12 (Euro)
Analog Resolution/Discrete Repeatability
100 mm to 250 mm: < 0.02; 250 mm to 400 mm: < 0.2
Max Sensing Distance (mm)
400
Minimum Sensing Distance (mm)
100
Delay at Power-up (ms)
3000
Sensing Beam Wavelength (nm)
650
Adjustments
Push Button; Remote Teach
Temperature Effect (mm/°C)
+/- 0.03 mm/°C from 100 to 250 mm, +/- 0.15 mm /°C at 1000 mm
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Output Saturation Voltage PNP Outputs
<2 V
Max Discrete (Switched) Output (mA)
100
Discrete (Switched) Outputs
1 NPN/PNP Configurable; 1 PNP
Output Protection
Protected against continuous overload and short circuit
Storage Temperature (°C)
-30 to 65
Max Operating Temperature (°C)
55
Min Operating Temperature (°C)
-20
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Warm-up Time (minutes)
10
Minimum Response Time (ms)
2
Spot Size (@ Reference Distance)
0.9 mm x 1.2 mm @ 400 mm
Minimum Window Size (mm)
1
Remote Teach and Laser Control Input Impedence
10 kΩ min.
Discrete Output Hysteresis (mm)
Automatically adjusted
Max Ambient Light (Lux)
10000
Max Off-state Leakage Current (µA)
PNP: <50 @ 30 V dc; Push/Pull: N/A
Power/Current Consumption (exclusive of load)
70 mA @ 24 V dc
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Feature: Remote Teach
Yes
Feature: Timing (Hold/Delay)
Yes
Feature: Chemical Resistant
No
Feature: Quick Disconnect
Yes
Feature: Health/ Marginal Signal Output
Yes
Common Ethernet Protocol
No
1-wire Serial Interface
No